Sapphire Plus - Assembly Tips (4/4)

Assembly tips for Sapphire Plus 3D Printer - Step 4

Step 6: Installing the belts

I made a mistake when installing the belt, since I haven't measured the provided belt beforehand (I expected to have a lot of margin so I cut the belt for the X motor with 10cm margin and was then short of 3 or 4...
3d printer belt tension
Sapphire Plus - Assembly Tips (3/4)

Assembly tips for Sapphire Plus 3D Printer - Step 3

Step 4: Mounting the Z lead screws

Before mounting your Z lead screws, you should check their planearity. Mine wasn't planar so you need to get a new one if it happens for you. To inspect your screws, please roll them on a flat surface, like...
3d printer sapphire plus
Sapphire Plus - Assembly Tips (2/4)

Assembly tips for Sapphire Plus 3D Printer - Step 2

Step 2: Check voltage on the motor drivers VREF

When I received my printer, the current on the motor drivers wasn't set correctly (it was random, I was lucky they didn't burn on first power up).

TMC2208 Pinout A4988 Pinout

The TMC2208 drivers (see picture ab...

3d printer current TMC2208
Sapphire Plus - Assembly Tips (1/4)

So you've decided to buy a Sapphire Plus printer (maybe after reading my review). You've received it and now, you start the puzzle...

Building a Sapphire Plus printer: a good tutorial

Well, the manual includes few pictures and its wording is poor. I'll try my best to list the operations requ...

3d printer
Two Trees Sapphire Plus CoreXY 3D printer review

Review of Two Trees's Sapphire Plus Core XY 3D printer

Sapphire Plus 3D Printer

I've decided to buy this 3D printer because it looked strong and solid and well designed. I'm not going to copy all the caracteristics for this printer here, as you'll probably find a lot more on the original manufacturer website.

You'...

3d printer sapphire plus two trees